The PDF file did not load properly or your web browser does not support viewing PDF files. Download 4115.pdf directly to your device.

Turn on MAIN POWER on both racks (orange switches, top right)

Contents

Computer

  • Select the Screen Down button to lower the screen.
  • Turn on the projector by pressing and holding the Display Power button for 3 seconds.
  • Continue instructions depending on use of a VGA or HDMI cable

VGA (Wall Panel 1)

  • Connect your laptop to the VGA cable.
  • Use a Ethernet cable to connect to the data jacks (Blue and Green jacks) around the room.
  • Select Wall Panel 1
  • Turn on your laptop

HDMI (Wall Panel 2)

  • Connect your laptop to the HDMI cable.
  • Use a Ethernet cable to connect to the data jacks (Blue and Green jacks) around the room.
  • Select Wall Panel 2
  • Turn on your laptop

DVD/VHS

  • Select the Screen Down button to lower the screen.
  • Turn on the projector by pressing and holding the Display Power button for 3 seconds.
  • Select the input CD/DVD or VHS on the switcher.
  • Insert Media and press play. Navigate menus with remote.
  • The volume knob is located at the upper right of the rack.

Using the Monitor

You can use the monitor to cue your DVD or VHS media

  • Turn on the monitor.
  • Select image source.
  • Audio can be cued using the right and/or left channel by selecting the source number.

Troubleshooting:

No picture?:

- Does laptop have power?
- Is data projector turned on?
- Is VGA or HDMI cable connected to media control panel and laptop?

No audio?:

- Is room volume on media control panel turned up?
- Laptop: Is the volume on your laptop turned up and output source correctly selected?